Combination flashing essential for installing multiple RoofLITE+ roof windows, in varying combinations and in conjunction with flat roofing materials

If you want to bring light into a large loft space and create an attractive glass wall effect, it’s a good idea to install a number of windows in a combi-type arrangement. For this type of installation, it’s worth using a dedicated solution that ensures the correct level of joining between the roof and the window and therefore the tightness of the construction. 

Designed for flat
roofing materials

The SCX model is
suitable for installing multiple roof windows side by side in conjunction with
flat roofing materials, such as slate or bitumen, with a profile height of
between 0 and 16 mm (2 x 8 mm). Several combinations are available, all of
which allow you to install roof windows at 100 mm intervals.

  • The 13E flashing allows you to install two roof windows side by side.
  • The 2E flashing allows you to install one roof window between two other windows. The SCX 2E flashing can only be installed in combination with a SCX 13E flashing.
  • The 46EE flashing allows you to install four windows in pairs, one above the other. The SCX 13E kit is required for installation.
  • The 5E kit enables a single roof window to be installed between two other windows where the windows are installed in two rows (minimum six windows at a time in combination – two rows of three windows). It can only be installed in combination with SCX 2E, SCX 13E and SCX 46E flashings.
  • The 7E flashing allows you to install two windows, one above the other. A standard flashing for flat roofing is also required for installation.

Tightness and durability

The SCX flashing
is manufactured from aluminium that is resistant to all weather conditions, in
a colour that matches the RAL7043 external finish of RoofLITE+ windows (grey).
Its tight-fitting apron ensures tightness even in heavy rain and strong winds. 

installation flashing is compatible with all RoofLITE+ roof window models.

Available dimensions

55 x 78

55 x 98

66 x 118

78 x 98

78 x 118

78 x 140

114 x 118

Technical Parameters: SCX
Use For Combinations
Flashing Material Aluminium
Type of Roofing Material Flat Roofing Materials (asphait, shingle, slate)
Flashing Designation Integral Part of Roof Window, Used for Achieving a Tight Seal between Window and Roofing Material
Roofing Material Height [ mm ] 0-16 (2xB)
Water Tightness [ % ] 100
Resistant to UV Radiation and all Weather Conditions
Roof Pitch 15°-90°
Exterior Appearance Powder-Coated, Dark Grey / Graphite Grey – RAL 7043
Screws in Colour of Cladding
Top Hood Equipped with a Replaceable Anti-Dust Seal and a Capillary Trough
Additional Function Numbered Flashing Elements in Roof Mounting Sequence
Number of Components in Flashing Package [ pcs ] Depends on Combination
Flashing Weight [ kg/depending on size ] 4,5 - 17,2
Components of Bottom Flashing Element Flat Sheet
Contains Lead No
Sheet Thickness [ mm ] 0,5 - 0,75
Packaging Packaging Quantity Dependent on Combination Type
Available Sizes [ cm ] 55x78, 55x98, 66x118, 78x98, 78x118, 78x140, 114x118
Vertical Trough Size [ mm ] E=100
Combination Type SCX 13E, 2E, 46EE, 5E, 7E
Additional Feature Sides of Flashing Adapted for Profiled Roofing Materials
Butyl Belt Not Required
Finish Aesthetically Crafted Components